Gate safety and fire access
Gate Safety Loops, UL 325 and Fire Department Access in Central Texas
How safety loops, photo eyes, edge sensors, UL 325, ASTM F2200 and fire department access work on automatic gates in Austin, Round Rock, Georgetown, Cedar Park, Leander and Pflugerville. Sagamore keeps up with the code so you don’t have to.
We’re gate and fence builders, not code officials or attorneys. This is general information, not legal or code advice. For your property, check with your city’s fire marshal, who has the final say on any gate across a fire lane.
Call (512) 337-3714 · Mon–Fri 8:00 AM–4:30 PM · Or get a ballpark with our instant quote tool
On this page
- The two safety standards behind every automatic gate
- What each safety device and loop does
- Fire department access at the gate
- Which fire code each city uses (checked November 2026)
- What to ask before you build
Built Right · Priced Fair · Planned Well · Trust Earned
A gate that closes on a car, or keeps out a fire truck, has failed.
An automatic gate is heavy machinery that runs unattended around cars, trucks, kids and people walking. Two things have to be true every time it moves: it stops before it hits anything, and emergency crews can get through it.
The rules for both are written into the standards your city’s fire code already references. We plan the gate around them from day one.
The Two Standards Behind Every Automatic Gate
- UL 325 is the safety standard for gate operators. It requires operators to monitor their external entrapment protection devices, such as photo eyes and edge sensors, checking each one at least once every open-and-close cycle. It also sorts operators into Classes I–IV by use (DASMA UL 325 FAQ).
- ASTM F2200 is the standard for how the gate itself is built for automatic operation, including guarding and screening on slide gates. A gate that doesn’t meet it can’t be made safe just by adding sensors.
Is UL 325 the law in Texas? Not as a stand-alone state law. But the International Fire Code that Texas cities adopt says electric gate operators shall be listed to UL 325 and gates for automatic operation shall comply with ASTM F2200 (see Austin Fire Code §503.6).
What Each Safety Device Does
- Photo eyes: a beam across the gate’s path. When a person or vehicle breaks it, the gate stops or reverses.
- Edge sensors: on the gate’s leading edge and pinch points. Contact stops and reverses the gate.
- Safety (reversing) loops: in the pavement on each side of the gate, so the gate won’t close on a vehicle.
- Shadow loop: under a swing gate’s arc, so the gate holds still while a vehicle sits in its path.
- Exit (free-exit) loop: inside the property, back from the gate, so the gate opens for vehicles leaving.
- Warning signs: on both sides of the gate.
How does a gate loop work? A wire set in a saw-cut in the pavement connects to a detector in the operator. When a car or truck sits over it, the detector senses the change and tells the operator a vehicle is there.
Can a loop detect a person? No. Loops sense vehicles, not people or bicycles, so they don’t replace photo eyes and edge sensors for protecting people. A safe gate uses both.
Fire Department Access at the Gate
Fire codes require a security gate across a fire access road to be approved by the fire code official and to have an approved means of emergency operation, kept working at all times. Many jurisdictions meet that with a Knox key switch, which lets firefighters open an automatic gate with their key, and some also require a receiver that opens the gate for an approaching emergency vehicle.
Round Rock is a clear example. Its Fire Marshal’s Office guideline calls for a City-approved Knox key switch mounted 5½ feet above grade that bypasses occupant controls and loops, an Opticom IR receiver on primary gates and automatic secondary gates (including main gates to storage facilities), a gate that opens freely on power failure and can be opened by hand by one person, and gate systems that comply with UL 325 and ASTM F2200 (Round Rock guideline).
Ask your fire marshal what your gate needs before you build. We design the gate and operator to work with the emergency access they require.
Which Fire Code Does Your City Use?
- Austin: Austin Fire Code based on the 2024 IFC. §503.6 adds Austin’s Fire Protection Criteria Manual to UL 325 and ASTM F2200 (Austin Fire Code 2024).
- Round Rock: 2024 IFC with local amendments, in effect since January 1, 2026 (Round Rock Fire Marshal).
- Georgetown: 2021 IFC with local amendments (Georgetown Fire and Life Safety).
- Cedar Park: 2021 IFC with local amendments. Cedar Park moved to Knox electronic e-keys on March 1, 2024 (Cedar Park Fire Prevention).
- Leander: 2021 IFC, adopted May 1, 2025 and effective July 1, 2025 (Leander Fire Marshal).
- Pflugerville (Travis County ESD No. 2): 2021 IFC for plans submitted on or after April 1, 2022 (Pflugerville Fire Department).
- Other cities and unincorporated areas: check with your city or county fire marshal or ESD.
Last checked: November 2026.
How We Plan a Safe Gate
1. Find out what applies
We check whether the gate crosses a fire lane and which city or ESD covers the site, so you know what to ask your fire marshal.
2. List every device
Photo eyes, edges, loops, signs and power-loss behavior are written into your proposal.
3. Test it with you
We test each safety device before we hand it over and show your staff the manual release.
Gate Safety and Fire Access FAQs
What is UL 325?
UL 325 is the safety standard for gate operators. It requires monitored entrapment protection, such as photo eyes and edge sensors, and sorts operators into Classes I–IV by where they’re used. Texas cities reference it through their fire codes.
What is ASTM F2200?
ASTM F2200 is the standard for building vehicle gates for automatic operation, including guarding and screening on slide gates. Fire codes require gates intended for automatic operation to comply with it.
What is the purpose of a loop detector on a gate?
A loop detector senses a vehicle over a wire loop in the pavement. Exit loops open the gate for vehicles leaving, and safety loops keep the gate from closing on a vehicle in its path.
Does my automatic gate need a Knox key switch?
If the gate crosses a fire lane, your fire marshal will likely require a way for firefighters to open it. In Round Rock that’s a City-approved Knox key switch, and many gates also need an Opticom receiver. Check with your city’s fire marshal.
What happens to a gate on a fire lane when the power goes out?
Round Rock, for example, requires the gate to open freely on power failure and be openable by hand by one person. Other cities set their own rules under the fire code, so ask your fire marshal.
Which fire code does my city use?
As of November 2026: Austin and Round Rock use the 2024 IFC (Austin with its own amendments and Fire Protection Criteria Manual). Georgetown, Cedar Park, Leander and Pflugerville (ESD No. 2) use the 2021 IFC with local amendments. Other areas, check with your fire marshal.
Want a Gate That's Safe and Ready for Inspection?
Call Sagamore Fence & Deck at (512) 337-3714 (Mon–Fri, 8:00 AM–4:30 PM), request a free estimate, or start with our instant quote tool. Financing is available for qualifying projects through Wisetack, subject to credit approval. Built Right.