Gate access control
RFID, Keypad and Push-Button Gate Access for Commercial and Community Gates
Gate access control decides who gets through your gate, when and how. We install RFID, keypad and push-button access at perimeter gates for RV parks, storage facilities, warehouses, commercial buildings and community amenities across Austin and Georgetown.
Call (512) 337-3714 · Mon–Fri 8:00 AM–4:30 PM · Or get a ballpark with our instant quote tool
At a glance
- RFID tags and readers for regular vehicles
- Keypads for guests, tenants and deliveries
- Push-button entry for community tennis courts
- Access control for outdoor amenities
- Free-exit loops for the way out
- Perimeter gates only, nothing inside buildings
Built Right · Priced Fair · Planned Well · Trust Earned
Shared codes, lost remotes and a line at the entrance.
The keypad code went out in a group text two years ago. Former tenants still have remotes. Guests wait at the gate for someone to answer the office phone. Each one is a gate access problem, and each one has a fix.
We plan the access with the gate and the operator, so the reader or keypad sits where drivers can reach it, the loops and safety devices work with it, and the fire department still has its own way in.
Ways to Open a Commercial Gate
- RFID tags: a tag on the vehicle is read by a reader at the gate as the vehicle pulls up, so regular users don’t stop to enter a code. Good for long-term RV park guests, staff and fleet vehicles.
- Keypads: drivers or walkers enter a code. Good for guests, tenants and deliveries. Change codes and use separate codes where the system allows, because shared codes travel.
- Push buttons: a simple button opens a gate, such as push-button entry for community tennis courts or a button for people walking out.
- Remotes: a transmitter in the car. Good for small sites. Plan how you’ll take back remotes when people leave.
- Free exit: a loop in the pavement senses a vehicle leaving and opens the gate. Loops sense vehicles, not people. See gate safety and loops.
Most commercial gates combine two or three, for example RFID for regulars, a keypad for guests and an exit loop for the way out.
RFID vs Keypad: Which Should You Choose?
- Choose RFID when the same vehicles come and go every day and you want traffic moving without stops.
- Choose a keypad when many different people need in for short periods and you’re willing to manage codes.
- Choose both for a mix of regulars and visitors, which describes most RV parks and storage facilities.
Access Control for Outdoor Amenities
HOAs and property managers use gate access for more than the front entrance. We install push-button entry for community tennis courts and access control for other outdoor amenities, so residents get in and the public doesn’t.
What We Don't Do
We work on the perimeter: fences, vehicle and pedestrian gates, gate operators and the access devices at the gate. We don’t install building access control, door card readers or anything inside a building. If you need building access as well, we’ll plan the gate so your building access company can work around it.
Can Someone Get Around an Electric Gate?
Any gate can be beaten by tailgating (following a car in) or a shared code. Good design cuts that down: a gate that closes promptly once a vehicle clears the loops, separate credentials instead of one shared code, and a reader placed so one car can’t open it for the next. A gate is one layer of your security, alongside lighting, locks and cameras.
Your Simple 3-Step Plan
1. List who needs in
Tenants, guests, staff, deliveries and emergency vehicles, and how each one arrives.
2. Choose the access
We place the reader, keypad or push button for cars, RVs or trucks and list it on your written proposal.
3. Hand out access
We test it with you, and you decide who gets a tag, a code or a button.
Gate Access FAQs
How does RFID gate access work?
A reader at the gate sends a radio signal. When a vehicle with an approved RFID tag pulls up, the tag answers, the system checks it and the gate operator opens the gate.
What's the difference between RFID and a keypad for a gate?
RFID reads a tag on the vehicle automatically. A keypad needs a code typed in. RFID suits regular users and busy entrances, and keypads suit visitors. Many sites use both.
Do you install card readers on building doors?
No. We install access devices at perimeter gates only. We don’t install door card readers, building access systems or anything inside a building.
Do you install push-button access for community tennis courts?
Yes. We install push-button entry for community tennis courts and access control for other outdoor amenities.
Can you add RFID or a keypad to a gate I already have?
Often, yes. We can add RFID, keypads or push-button entry to an existing automatic gate, or add an operator and access control to a manual gate that’s sound enough to automate.
What happens to gate access if the power goes out?
It depends on the operator’s power setup and battery backup. The gate’s power-loss behavior is set at the operator.
Ready to Control Who Gets Through Your Gate?
Call Sagamore Fence & Deck at (512) 337-3714 (Mon–Fri, 8:00 AM–4:30 PM), request a free estimate, or start with our instant quote tool. Financing is available for qualifying projects through Wisetack, subject to credit approval. Built Right.